Government Saw Blade and Handtool Manufacturing Contracts
NAICS 332216 · Saw Blade and Handtool Manufacturing
Government saw blade and handtool manufacturing contracts totaled $331M across 268,866 awards from FY2024 to FY2026. Obligations were up 2.1% in FY2026 compared with FY2025, and the General Services Administration was the largest buyer, accounting for $172M (52% of the total).
Key figures
In FY2026, contract obligations were $103,593,821 across 114,003 awards with activity that year, a change of +2.1% from $101,446,879 in FY2025. From FY2024 to FY2026, obligations totaled $330,659,464 across 268,866 awards.
- Obligated in FY2026
- $104M
- Awards in FY2026
- 114,003
- Change vs FY2025
- +2.1%
- Total, FY2024 to FY2026
- $331M
Note: FY2026 ended on Sep 30, 2026. The Department of Defense publishes contract data with a 90-day delay, so FY2026 totals may still rise as late reports arrive.
Saw Blade and Handtool Manufacturing contract spending by year
Federal saw blade and handtool manufacturing contracts per fiscal year (October to September), under NAICS 332216. The table below lists the same numbers.
| Fiscal year | Obligated | Awards | Change |
|---|---|---|---|
| FY2026 | $103,593,821 | 114,003 | +2.1% |
| FY2025 | $101,446,879 | 84,278 | -19.2% |
| FY2024 | $125,618,765 | 74,075 | n/a |
About government saw blade and handtool manufacturing contracts
Federal spending on saw blade and handtool manufacturing contracts fell 18% from FY2024 ($126M) to FY2026 ($104M). FY2026 closed recently, and Defense Department contracts are reported up to 90 days late, so its total may still rise.
Spending is spread widely: the top 3 contractors account for 34% of the total. No single company dominates, which leaves room for new and small contractors.
The General Services Administration spends the most on saw blade and handtool manufacturing contracts (52%), followed by the Department of Defense. The states with the most of this work are New York, Wisconsin and Massachusetts.
NAICS 332216 (Saw Blade and Handtool Manufacturing) is part of the Manufacturing sector.
Top saw blade and handtool manufacturing government contractors
Companies ranked by contract dollars under NAICS 332216 (Saw Blade and Handtool Manufacturing).
| # | Contractor | Obligated | Share |
|---|---|---|---|
| 1 | Idsc Holdings LLC | $44,306,597 | 13.4% |
| 2 | Kaufman Company, Inc. | $34,406,446 | 10.4% |
| 3 | Mono Machines LLC | $33,035,899 | 10.0% |
| 4 | Premier & Companies, Inc. | $21,611,303 | 6.5% |
| 5 | Invisio Communications Inc | $13,015,722 | 3.9% |
| 6 | Lawson Products, Inc. | $11,992,596 | 3.6% |
| 7 | Kipper Tool Company | $8,402,106 | 2.5% |
| 8 | Norex Group, LLC | $7,223,614 | 2.2% |
| 9 | Rhinestahl Corporation | $6,689,242 | 2.0% |
| 10 | Industries for the Blind and Visually Impaired, Inc. | $6,460,473 | 2.0% |
Agencies buying saw blade and handtool manufacturing
Federal agencies ranked by contract dollars under NAICS 332216.
| # | Agency | Obligated | Share |
|---|---|---|---|
| 1 | General Services Administration | $172,116,185 | 52.1% |
| 2 | Department of Defense | $152,789,005 | 46.2% |
| 3 | Department of Homeland Security | $4,129,150 | 1.2% |
| 4 | Department of State | $548,635 | 0.2% |
| 5 | Department of Veterans Affairs | $512,598 | 0.2% |
| 6 | Department of the Interior | $188,799 | <0.1% |
| 7 | Department of Justice | $122,788 | <0.1% |
| 8 | Department of the Treasury | $82,822 | <0.1% |
| 9 | Department of Commerce | $51,171 | <0.1% |
| 10 | U.S. Agency for Global Media | $46,911 | <0.1% |
Where saw blade and handtool manufacturing contract work is performed
States ranked by contract dollars, using the place of performance on each award.
| # | State | Obligated | Share |
|---|---|---|---|
| 1 | New York | $60,814,098 | 18.4% |
| 2 | Wisconsin | $50,675,739 | 15.3% |
| 3 | Massachusetts | $38,581,805 | 11.7% |
| 4 | Georgia | $17,504,145 | 5.3% |
| 5 | Texas | $16,740,237 | 5.1% |
| 6 | California | $15,140,268 | 4.6% |
| 7 | Ohio | $12,051,780 | 3.6% |
| 8 | Michigan | $11,844,224 | 3.6% |
| 9 | Maryland | $10,934,570 | 3.3% |
| 10 | Illinois | $10,341,579 | 3.1% |
Recent saw blade and handtool manufacturing contract awards
The latest saw blade and handtool manufacturing contracts, newest first. Each award ID links to its record on USAspending.gov.
| Start date | Recipient | Agency and description | Amount | Record |
|---|---|---|---|---|
| Sep 30, 2026 | Minton Supply Co | General Services AdministrationVENTILATOR, AIR CIRCULATING, ALUMINUM FREAME AND VANES, FOUR-WAY BLOW PATTERN NUMBER 40, 1.5 INCH VALES 6 INCHES TALL, 6 INCHES WIDE | $109 | 47QSWA26P1NM7 |
| Sep 30, 2026 | Minton Supply Co | General Services AdministrationGRATING,METAL, P/N 1971460W | $109 | 47QSWA26P1NM6 |
| Sep 30, 2026 | Minton Supply Co | General Services AdministrationVENTILATOR, AIR CIRCULATING, ALUMINUM FREAME AND VANES, FOUR-WAY BLOW PATTERN NUMBER 40, 1.5 INCH VALES 6 INCHES TALL, 6 INCHES WIDE | $109 | 47QSWA26P1NM5 |
| Sep 30, 2026 | Minton Supply Co | General Services AdministrationGRATING,METAL, P/N 1971460W | $109 | 47QSWA26P1NM4 |
| Sep 30, 2026 | Minton Supply Co | General Services AdministrationGRATING,METAL, P/N 1971460W | $109 | 47QSWA26P1NM3 |
| Sep 30, 2026 | Minton Supply Co | General Services AdministrationGRATING,METAL, P/N 1971460W | $109 | 47QSWA26P1NM2 |
| Sep 30, 2026 | Minton Supply Co | General Services AdministrationGRATING,METAL, P/N 1971460W | $109 | 47QSWA26P1NM0 |
| Sep 30, 2026 | Minton Supply Co | General Services AdministrationVENTILATOR,AIR CIRC | $109 | 47QSWA26P1NLZ |
| Sep 30, 2026 | Minton Supply Co | General Services AdministrationVENTILATOR, AIR CIRCULATING | $109 | 47QSWA26P1NLY |
| Sep 30, 2026 | Minton Supply Co | General Services AdministrationVENTILATOR, AIR CIRCULATING, ALUMINUM FREAME AND VANES, FOUR-WAY BLOW PATTERN NUMBER 40, 1.5 INCH VALES 6 INCHES TALL, 6 INCHES WIDE | $327 | 47QSWA26P1NLW |
| Sep 30, 2026 | Premier & Companies, Inc. | General Services AdministrationTAPE,REFLECTIVE | $2,999 | 47QSWA26P1NLR |
| Sep 30, 2026 | Kaufman Company, Inc. | General Services AdministrationCLEANER,VACUUM,ELEC | $142 | 47QSWA26P1NLP |
| Sep 30, 2026 | Premier & Companies, Inc. | General Services AdministrationDISINFECTANT,UTILIT | $1,350 | 47QSWA26P1NLG |
| Sep 30, 2026 | Premier & Companies, Inc. | General Services AdministrationGAME,FOOSBALL | $1,049 | 47QSWA26P1NLF |
| Sep 30, 2026 | Kaufman Company, Inc. | General Services AdministrationSIFTER,FLOUR,HAND | $94 | 47QSWA26P1NLD |
| Sep 30, 2026 | Premier & Companies, Inc. | General Services AdministrationTRAY,MESS,COMPARTME | $705 | 47QSWA26P1NLA |
| Sep 30, 2026 | Kaufman Company, Inc. | General Services AdministrationMARKER,TRAFFIC | $134 | 47QSWA26P1NL9 |
| Sep 30, 2026 | Premier & Companies, Inc. | General Services AdministrationCOVER,BAKING AND RO | $327 | 47QSWA26P1NL8 |
| Sep 30, 2026 | Premier & Companies, Inc. | General Services AdministrationGLOVES,DISPOSABLE | $120 | 47QSWA26P1NL7 |
| Sep 30, 2026 | T.W. Evans Cordage Co. Inc. | General Services AdministrationCHAIN ASSEMBLY,SING | $1,822 | 47QSWA26P1NL6 |
| Sep 30, 2026 | Norex Group, LLC | General Services AdministrationCLEANER,VACUUM,ELEC | $390 | 47QSWA26P1NL4 |
| Sep 30, 2026 | Kaufman Company, Inc. | General Services AdministrationTALCUM POWDER | $466 | 47QSWA26P1NL1 |
| Sep 30, 2026 | Kaufman Company, Inc. | General Services AdministrationOPENER,CAN,MOUNTED | $144 | 47QSWA26P1NKW |
| Sep 30, 2026 | Premier & Companies, Inc. | General Services AdministrationTAPE,FLAGGING | $150 | 47QSWA26P1NKQ |
| Sep 30, 2026 | Kaufman Company, Inc. | General Services AdministrationTAPE,FLAGGING | $253 | 47QSWA26P1NKH |
Open saw blade and handtool manufacturing government bids
The newest open notices from SAM.gov. Bidding needs a free SAM.gov registration.
Dept of Defense · Solicitation · NAICS 332216
Posted Oct 30, 2026 · Responses due Nov 30, 2026
Dept of Defense · Combined Synopsis/Solicitation · NAICS 332216
Posted Oct 30, 2026 · Responses due Nov 13, 2026
Dept of Defense · Solicitation · NAICS 332216
Posted Oct 29, 2026 · Responses due Nov 30, 2026
- 51--HDLG TOOL,IB STATORClosing soon
Dept of Defense · Combined Synopsis/Solicitation · NAICS 332216
Posted Oct 29, 2026 · Responses due Nov 6, 2026
Dept of Defense · Solicitation · NAICS 332216 · NJ · Small Business Set Aside - Total
Posted Oct 29, 2026 · Responses due Nov 12, 2026
How to win government saw blade and handtool manufacturing contracts
Federal saw blade and handtool manufacturing contracts are posted on SAM.gov under NAICS 332216. Register your business free on SAM.gov with this code, watch for saw blade and handtool manufacturing bids, and look for small business set-asides: many saw blade and handtool manufacturing contracts for small business are reserved for small firms.
Explore government saw blade and handtool manufacturing contracts by state, agency and contractor
- General Services Administration contracts
- Department of Defense contracts
- Department of Homeland Security contracts
- Department of State contracts
- Department of Veterans Affairs contracts
- Government contracts in New York
- Government contracts in Wisconsin
- Government contracts in Massachusetts
- Government contracts in Georgia
- Government contracts in Texas
Frequently asked questions
- What NAICS code is used for government saw blade and handtool manufacturing contracts?
- Federal saw blade and handtool manufacturing contracts use NAICS 332216 (Saw Blade and Handtool Manufacturing). List this code in your free SAM.gov registration to be found for these contracts.
- Who are the largest saw blade and handtool manufacturing government contractors?
- By contract dollars under NAICS 332216 from FY2024 to FY2026, the largest were Idsc Holdings LLC ($44.3M), Kaufman Company, Inc. ($34.4M) and Mono Machines LLC ($33M).
- Which agencies buy the most saw blade and handtool manufacturing?
- From FY2024 to FY2026, the biggest buyers were the General Services Administration ($172M), the Department of Defense ($153M) and the Department of Homeland Security ($4.1M).
- Where are government saw blade and handtool manufacturing contracts performed?
- By contract dollars, the most federal saw blade and handtool manufacturing work is performed in New York ($60.8M), Wisconsin ($50.7M) and Massachusetts ($38.6M).
- Is federal spending on saw blade and handtool manufacturing contracts growing?
- Federal saw blade and handtool manufacturing contract obligations fell 18% from FY2024 ($126M) to FY2026 ($104M). FY2026 closed recently, and Defense Department contracts are reported up to 90 days late, so its total may still rise.
- Do I qualify as a small business for saw blade and handtool manufacturing contracts?
- It depends on the SBA size standard for NAICS 332216, which is set either by average annual revenue or by number of employees. Check the current table of size standards on sba.gov before you bid on small business set-asides.
- What do I need to bid on government saw blade and handtool manufacturing contracts?
- An active SAM.gov registration (free) with NAICS 332216 listed, the licenses and insurance your state requires for saw blade and handtool manufacturing work, and examples of similar past work. Some solicitations also ask for specific certifications or security clearances.